KIKUSUI PMX-Multi Series Compact Multi-Output DC Power Supply (CV/CC)

Each output is isolated
High setting resolution (Voltage: 1mV, Current: 0.1mA)
Tracking control in all channels
Simple series/parallel connection between channels (CH1 & CH2)
Tracking control in all channels
Key lock, Preset memory function (3 slots)

Features

Specifications Output Ripple Line Regulation Load Regulation Input Weight Model CH CV CC CV CC CV CC CV CC AC Power Approx PMX32-3DU 1 32.000V 3.000A 500μV 1mA 3mV 0.01% + 0.25mA 4mV 5mA 217Vac * ± 10 ％ 700VA 13 kg (28.66 lb) 2 32.000V 3.000A 1mA 3mV 4mV PMX32-3TR 1 32.000V 3.000A 1mA 3mV 4mV 900VA 2 32.000V 3.000A 1mA 3mV 4mV 3 6.000V 5.000A 2mA 1mV 5mV PMX32-2QU 1 32.000V 2.000A 1mA 3mV 2mV 800VA 2 32.000V 2.000A 1mA 3mV 2mV 3 18.000V 2.500A 1mA 3mV 3mV 4 18.000V 2.500A 1mA 1mV 3mV * 100 Vac, 117 Vac, 200 Vac and 234 Vac are factory options.

Simple Series/Parallel Connection Between Channels

Series Operation

CH1 and CH2 can be connected in series to increase the overall voltage output range. CH2 operates as master and CH1 as slave. The total output voltage will be the sum of CH1 and CH2.

Parallel Operation

CH1 and CH2 can beconnected in parallel to increase the overall current range. CH2 operates as master and CH1 as slave. The total output current will be the sum of CH1 and CH2.

Tracking Feature

The tracking feature allows the operator to control the ratio for increase/decrease of output among multiple channels within the power rating. This feature can be used freely among all channels with two ratio options:absolute value variation and variation ratio.

Absolute Value Variation

This mode allows for voltage/current settings in all specified channels to change at the same rate as a selected channel.

Variation Ratio

This mode allows for voltage/current settings in all specified channels to change in equal proportion to a selected voltage or current rating.

*The variable range is from 0.0% to 200.0%

Example of operation of tracking feature: PMX32-2QU

When you turn the rotary knob during tracking operation, the outputs change at the same percentage as the preset output percentage (b/a). b/a = d/c This proportional expression is satisfied.

Delay Function

The optional setting creates a programmable delay between the OUTPUT switch being activated and the actual output being released. The setting range for DELAY TIME is from 0.1 – 99.9 seconds. When power supplies are not activated properly, there is the slight risk of damage being caused to the overall system. For this reason ON delay control is a very important feature that is required for power source output. This feature is also necessary when turning output OFF, and is highly convenient for operating circuits.

Note: The actual rise/fall time with output off will vary depending on the output and load conditions. Note that the timing chart above ignores rise and fall time. There are cases where the actual delay time varies by a few tens of milliseconds even when the delay time is set to 0 seconds.

Easy Access with the Built-in Web Server

Use a browser from a PC, smartphone, or tablet to access the web server built into the PMX-Multi series for convenient control and monitoring.

Recommended browser

Requires for the Internet Explorer version 9.0 or later
Requires for the firefox 8.0 or later
Requires for the safari / mobile Safari 5.1 or later
Requires for the Chrome 15.0 or later
Requires for the Opera 11.0 or later

*Connecting with a smartphone, tablet, etc. requires a Wi-Fi environment (wireless LAN router etc.).

KIKUSUI PMX-Multi Series Compact Multi-Output DC Power Supply (CV/CC)